D&V Engineering

1. 433Mhz RF Wireless Transmitter Receiver Module
2. Packing Including One pair
3. The transmission occurs at the rate of 1Kbps – 10Kbps. The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter.
4. Wide input supply (2.5 V to 12V) , Easy to integrate (V+, GND, and Data)

1. 433Mhz SI4463 1000M HC-12 Replace Bluetooth Antenna
2. Power supply voltage : 3.3V
3. Default communication distance: about 1000 meters
4. Default idle current: 16 ma
5. Module size: 27.8mm*14.4mm*4mm

1. 3.3V VCC Adapter Board for NRF24L01 Wireless Transceiver Module enables you to use NRF24L01 type transceivers on 5V systems like Arduino
2. It regulates the 3.3V input to 1.9~3.6V DC and incorporates bypass capacitors for reliable operation
3. Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator

1. Low cost single-chip 2.4GHz RF transceiver IC.
2. Range with Antenna: 250Kb rate (Open area) >1000 meter.
3. 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs.
4. Used on a wide variety of applications that require wireless control.
5. Power: Ultra low power consumption.

1. COMPATIBILITY: 433MHz wireless receiver module with superheterodyne design, suitable for various remote control and automation applications
2. TECHNICAL SPECS: Operating voltage 5V DC with 4-channel output capability and high receiving sensitivity for reliable signal reception
3. DIMENSIONS: Compact circuit board measuring approximately 3 cm x 2 cm, with standard pin headers for easy integration
4. FEATURES: Built-in crystal oscillator for frequency stability, with LED indicator for signal status monitoring
5. PERFORMANCE: Working range up to 100 metres in open areas, ideal for wireless control systems and DIY electronics projects

1. Chip: MPU6050+HMC5883L+BMP180
2. 10 DOF Module (3 axis gyroscope + 3 accelerometer + 3 axis magnetic field +air pressure)
3. Technology:Immersion Gold PCB
4. Power Supply :3-5v
5. Communication: IIC communication protocol (fully compatible with the 3-5v System,circuit LLC is contained )

1. Working voltage: DC 3~5V; Holding Current: ≤5mA
2. Working Frequency: 433 MHz;Receive A Sensitivity: -108dBm
3. Receive Distance: 50 meters above;Frequency range: ±2 MHz
4. Working mode: Motion point, auto-lock, interlock

RXB6 433Mhz Superheterodyne Wireless Receiver Module work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only receivers, they will only work communicating data one-way, you would need two pairs (of different frequencies) to act as a transmitter/receiver pair.

1. Car remote door switch (RKE);
2. Remote control door opener;
3. Wireless security alarm;
4. Remote control curtains;
5. The wireless industrial controller;
6. A wireless data transmission.

1. Power Enable mode power consumption can be done lowest 50nA;
2. has an analog RSSI signal strength level output;
3. Good selectivity and spurious radiation suppression, and easy through CE / Fcc international certification;
4. Good local oscillator radiation suppression, multiple receiver modules to work together (ie, more than single income) and will not interfere with each other, used together does not affect the receiving distance.
5. Good local oscillator radiation suppression, multiple receiver modules to work together (ie, more than single income) and will not interfere with each other, used together does not affect the receiving distance.